An Ideal Cleansing Agent for PCB's:  It's Non-Flammable! And this flux remover solvent is an all-purpose cleaner that cleans and removes light oils, silicones, waxes, greases and similar contaminants from PC boards typical within electronics manufacturing. Certainly one of the key components with any successful PCB assembly work (whether prototyping, low volume production, or rework) depends on proper cleansing both the substrate and components after solder reflow. Zephyrtronics has made this critical process so much easier with the introduction of the new NFR Series of Non-Flammable Flux Remover, just maybe the most ideal cleansing agent to date developed for the electronic bench.

Gentle, But Excellent Flux Cleaning Properties: Our NFR Series Flux Remover is a gentle, yet extremely effective flux cleansing agent which cleans most all of the common fluxes found at the bench including R, RA, RMA, Synthetic and Organic Fluxes.

No Minimum Orders:  Did you know that Zephyrtronics has no minimum orders?  Your Non-Flammable Flux Remover can ship out to you filled into three, convenient container options: our popular 2 Oz. Bottle, an 8 Oz. Can, or even in a one gallon canister with the MSDS docs included with every order.

NFR Series
Non-Flammable
Flux Remover

A Brief History:  While most flux removers were developed for high-volume production reflow machines that include harsh agents, our NFR Series of Non-Flammable Flux Remover is ideal for use at the electronic bench where prototyping and rework happens.  This is  critical where engineers and technicians work with hot gas and hot electrical tools because our NFR Series is non-flammable.

So Many Excellent Cleaning Properties: It is important to note that this NFR Non-Flammable Flux Solvent is non-corrosive, and best of all has rapid evaporation properties right at room temperature. Moreover, while on one hand, it is a very gentle solvent, it is still  most effective at cleaning away silicons, grease, oil, films, and even ionic soils from the PCB assembly after soldering or de-soldering.

TECHNICAL DATA & SPECS

NON-FLAMMABLE FLUX REMOVER

Description

NFR-0056 NON-FLAMMABLE
 FLUX REMOVER
In Handy 2 Oz. /59ml Bottles

$19.85

NFR-2PAK NON-FLAMMABLE
 FLUX REMOVER
In Two Handy 2 Oz. 59ml Bottles
SAVE 5%!

$37.71

NFR-SXPK NON-FLAMMABLE
 FLUX REMOVER
6-Pack of 2oz. Bottles of Flux
SAVE 10%!

$107.19

NFR-S226 NON-FLAMMABLE
FLUX REMOVER
In Economy 8 Oz. / 239ml Cans
 SAVE 15%!

$67.49

NFR-SGAL NON-FLAMMABLE
 FLUX REMOVER
Single-Gallon / 3.8 Liter Can

$385.00

Enhanced PC Board Cosmetics: Whether you are working with no-clean or more traditional fluxes, whether they are mild or active fluxes, whether they are organic or synthetic fluxes, whether they are RMA, R or RA fluxes, the NFR Non-Flammable Flux Remover cleans the PCB and leaves a cosmetically improved substrate afterward.

Why work with flammable flux removers when you can work with an equally good one that is non-flammable?

NON-FLAMMABLE
 FLUX
 REMOVER
SHIPS WITH MSDS

ATE-40 SINGLE TOUCH ESD PUMP DISPENSER

Item

Description

Price

Buy Now

100ml
3.4 Oz

Small, single touch pump top bottle for solvents, cleaners and alcohol.  Ideal for clean rooms and PCB soldering work. Helps prevent wasteful evaporation &  contamination. Exceeds all MIL-Specs. Stainless steel hinged lid is included! Bottle is non-reactive polyethylene and is ESD-Safe. Resistance Specs: 10^{6 -} 10⁹Ω

ATE-60 SINGLE TOUCH ESD PUMP DISPENSER

Item

Description

Price

Buy Now

200ml
7 Oz

Mid-size, single touch pump top bottle for solvents, cleaners and alcohol.  Ideal for clean rooms and PCB soldering work. Helps prevent wasteful evaporation &  contamination. Exceeds all MIL-Specs. Stainless hinged lid is included! Pump bottle molded in non-reactive, static-dissipative polyethylene and is ESD-Safe. Resistance Specs: 10^{6 -} 10⁹Ω