|
|
|
|
QFP
Rework
TopLine QFP Lead Straightener
SMD Pin Alignment Tool
TQFP, QFP, LQFP |
|
|
|
|
Straightening Tool / Device for Re-Shaping & Re-Aligning
QFP's, TQFP's and LQFP's |
|
QFP Lead Straightener $195 |
 |
|
|
|
|
|
|
Are bent leads on
your QFP's causing you co-planarity problems, chip alignment
problems, causing your unwanted solder bridging? Stop
pulling your hair out. And you don't need throw away the
components either. TopLine® has a terrific solution that's been
around for years!
Here's
an
essential tool for any electronic benchtop, the TopLine®,
patented AT-900000 Universal QFP
Lead Straightening Template that enables you to
reshape and re-align bent pins and leads on all the many
sizes of QFP and TQFP and LQFP component packages.
|
|
|
| |
 |
|
Great Utility!
The Straightening Plate handles the full,
wide range of lead
pitches from as tight as 0.4mm clear up to 1.0mm and there
are 46 different QFP patterns all on this very helpful
template. So, stop the fretting over bent leads, even with
ultra-fine pitch (UFP). TopLine® has you
covered. |
|
It's Easy To Straighten All Leads On Chips
Like the QFP100 Above. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Stainless Steel Construction: Manufactured from
durable, 0.050" (1.27 thick stainless steel plate,
the
AT-900000 won't wear out as
other plastic so-called straightening devices do just
shortly after they've been used.
The 5 mil deep etched
recessed patterns precisely mate with the leads of the
QFP, TQFP and LQFP chips. This patented design by TopLine®
has now been a staple of the electronic bench for over a
decade now where ever prototyping and rework and repair is
done.
Also Ideal for Your Quality Control in the Receiving
Department! Your QC group can use the
AT-900000 to verify the
number pins, chip body size and even the pitch of unknown
QFP components. In fact, this is a great QC tool for quick,
reliable checks since so many chip packages now have the
same body, but contain a myriad of different lead counts.
|
|
Bent Leads?
Co-Planarity Issues? Here's the Solution!
Reshape and Realign Delicate, Fine Pitch Leads
With the AT-900000. 46 Distinct QFP Patterns! |
|
|
|
|
|
|
|
|
AT-900000 Lead
Straightener |
|
Description |
|
 |
AT-900000
Lead
Straightener
Plate
Stainless Steel Plate
With 46 Patterns for
QFP, LQFP & TQFP |
|
Only
$199 |
|
|
|
|
|
|
Check Out
All The Chips That The Lead Straightener Handles! |
|
|
Pitch of Leads |
Component
Package Description |
|
0.4mm / 0.015" |
TQFP-64L,
TQFP-80L, TQFP-120L, TQFP-128L,
TQFP-176L, LQFP-216L, LQFP-256L, QFP256L |
|
0.5mm / 0.019" |
TQFP-32L,
TQFP-48L, TQFP-64L, QFP-64L,
TQFP-80L, TQFP-100L, QFP-100L, LQFP-128L,
QFP-128L, LQFP-144L, LQFP-160L, LQFP-176L,
QFP-184L, LQFP-208L, QFP-208L, QFP-240L |
|
0.635mm /
0.025" |
84L,
BQFP-100L, BQFP-132L |
|
0.65mm /
0.0256" |
TQFP-52L,
QFP-52L, TQFP-80L, QFP-80L,
QFP-100L, QFP-144L, FQFP-160L |
|
0.8mm / 0.031" |
TQFP-32L,
TQFP-44L, QFP-44, QFP-64L,
QFP-80L, QFP-120L, QFP-128L |
|
1.0mm / 0.039" |
TQFP-44L,
QFP-44L, TQFP-52L, QFP-52L, QFP-64L |
|
|
|
|
|
|
|
|
|
|
|
Stainless
Straightening Probes |
|
Description |
|
 |
Lead
STP-SET
Six Piece Set
Of Non-Magnetic
Stainless Steel
Probes &
Tweezers |
|
Only $22 |
|
|
|
|
|
|
|
|
|
 |
|
And Easy to Use: With just standard benchtop tools such as
non-magnetic, stainless steel dental picks, probes and tweezers, you can quickly adjust
the QFP into the recessed template slots and straighten and
re-align your delicate leads. It's that simple!
And isn't the quality of your work worth it?
And of course, the AT-900000
is ESD safe and is Lead-Free and RoHS compliant. TopLine®
recommends that the unit should always be used on a grounded
bench pad with a wrist strap. |
|
|
