Little Things Mean a Lot:  The ZT-8001 SolderMill™ keeps your solder wire neat, spooled, ready for use like other traditional spool holders, but just wait until you tug at the solder and experience the difference our SolderGlide™ makes! Your solder wire now pulls out effortlessly. There's nothing like it! Why settle for anything less?

Introducing the Essential SolderGlide™ to Solder Wire Dispensing:  Anyone who has ever used a solder wire dispenser knows that as helpful as they can be, they can also be a real drag. A literal drag! How many times have you had the solder wire catch up in the dispensing opening causing the entire spool of solder to drag toward you when you only wanted the wire?  Well, that day is done now thanks to the unique, simple SolderGlide™ feature incorporated into every Zephyrtronics ZT-8001 SolderMill™.  And when coupled with four non-skid rubber feet, you will want to throw away all of your old holders the day you receive ours! That's just how good they are.

Compact in its portable footprint, the SolderMill™ is your solder wire holder at the bench helping organize and store your solder wire in place, preventing your solder from unraveling and breaking.

The SolderGlide™ Feature Within
the SolderMill™ Transforms the Traditional Solder Spool Dispenser!

Like traditional wire holders, the ZT-8001 helps technicians immediately locate and access the end of the solder strand when it is needed without having to search around the bench saving time and frustration. It's just that SolderMill™ now offers so much more.

The SolderGlide™ is "Built In": Each ZT-8001 SolderMill™ incorporates the slick, slippery bushing right where the solder wired threads through the dispenser. This simple feature will bring instant satisfaction to any soldering technician who struggles at the bench with their spooled solder wire while at work. It is simply transforms the old, traditional solder wire holders.

Four Non-Skid Feet: Certainly there are other "spool holders" on the market, but may we point out that the SolderMill™ features four non-skid rubber feet to keep your unit securely in place when you pull and draw the solder...we mention this for, as trivial as it may seem, there are, to our knowledge, no other "spool holders" without this simple, but helpful feature. Further, none have our thoughtful SolderGlide™ feature either.

Fabricated from Steel, Not Aluminum! And that's not all! Unlike other solder wire holders, the SolderMill™ is made out of steel, not lightweight aluminum. So when coupled with the non-skid feet, your solder wire spool will "stay put" while only the solder wire moves!

Space Saving & Economical Design: Understanding and appreciating the value of every square inch at the electronic bench, the SolderMill™  is only a mere 3.5 inches wide, 3.2 inches deep, and 2.2 inches high.

ESD Safe! Handsome & Durable Steel With Baked Enamel Paint Finish: And while we are boasting, the SolderMill™  doesn't have just some cheesy, cheap black oxide finish that eventually gives way to rust and looks like bloody hell sitting on your bench (check out the others).  Fabricated out of steel and then baked with a hard enamel paint for durability during industrial use, the SolderMill™ is also ESD-Safe.

Be the First One at Your Company With the SolderMill™! Oh, and be prepared for your colleagues to be envious of your new SolderMill™ when they see you drawing out your solder wire so effortlessly. Better yet, why not pick up a few extras for your associates and make their day?
 

Locates, Holds & Dispenses Your Solder Wire: And like traditional wire holders, the ZT-8001 helps technicians immediately locate and access the end of the solder strand when it is needed without having to search the bench saving time and frustration.

An Economical Price & It's Made Right Here in the USA: Finally, the SolderMill™, like all of the Zephyrtronics premium equipment, is manufactured right here in Southern California and is always in stock at our factory in Los Angeles County. That means that we don't need to pay for ocean freight and a container load to cross the ocean for eight weeks from a slave labor "off-shore facility" in order to market such a simple, but utilitarian and helpful item.

Convenient Loading: How much easier could it be than this? To load a new spool of solder into the SolderMill™, simply lift out the tube/axis by sliding it up, remove the old spool, slide on the new one, and position them back into the ZT-8001 base as shown above.

The ZT-8001 SolderMill™ Shown  with 1 Lb. Spool of Flux-Cored Solder Wire. SWE-1NC3

Soldering is Easier With the SolderMill™ Shown Above With the AirPlus Fume Extractor