RoHS, Solder Paste, Lead-Free, No Lead, Solder, RoHS Compliant


RoHS Compliance       Lead-Free Solder Alloys       Certification

RoHS & WEEE Compliance Statement for our ZeroLead®  Solder Paste

ZeroLead® Solder Paste
A  No-Clean Formulation!
Featuring a 6-Month Shelf Life
 Without Refrigeration!
Buy Now! Available in convenient
10cc syringes (barrels) from Zephyrtronics.

ZeroLead® can ship same day "on ice".



Zephyrtronics hereby confirms that ZeroLead® ZLSP-10CC, a lead-free solder paste, complies with the latest RoHS regulations, and further confirms the product, ZeroLead® ZLSP-10CC, does not contain the following hazardous metals and / or substances:  mercury, hexavalent chromium, polybrominated biphenyl PBB, polybrominated diphenyl ether PBDE. Our ZeroLead® ZLSP-10CC meets the lowest acceptable levels for lead (<1000ppm) and cadmium (<100ppm) as established by the European Directives 2002/96/EC (WEEE) and 2002/95/EC (RoHS). 

ZeroLead® ZLSP-10CC is a lead-free solder paste complies with the requirements of the European Directives 2002/96EC (WEEE) and 2002/95/EC (RoHS).  For any other questions or for additional information, please do not hesitate to contact us here at Zephyrtronics.  -----David Jacks, President of Zephyrtronics, April 17, 2008



RoHS Regulations and ZeroLead® Specifications

RoHS Lead Accepted Levels:


ZeroLead® Lead Levels: <500ppm

RoHS Cadmium Accepted Levels:


ZeroLead® Cadmium Levels <10ppm



Item Buy Now

10cc Syringe Filled with 12 grams of Paste
Ships with MSDS. Always Fresh. Ships "On Ice"

6 of
10cc Syringes Each with 12 grams of Paste
Ships with MSDS. Always Fresh. Ships "On Ice"
Save 10%

 Refrigeration Rack


Item Buy Now

The PasteRack™
 10cc Refrigeration Rack
6-Syringe Holder
(Stores Solder Paste Vertically!)



The PasteRack™
10cc Refrigeration Rack
12 Syringe Holder
(Store Solder Paste Vertically!)




   Technical Data

Product Name: ZeroLead® Lead-Free Solder Paste
Product No:
Composition:  96.5 Sn / 3 Ag / 0.5 Cu

Solder Liquidus (Melt) Point:
217°-219°C (422°- 426°F)

Flux Activation Temp: 140°C (Single Stage Activation)

Features:  No Clean Formulation
                 VOC Free
                 Halide Free
                 Meets or Exceeds Bellcore Specs
                 Copper Mirror: Pass
                 Meets J-STD-004, J-STD-005,
                           J-STD-006, IPC-TM-650

Benefits:   Enhanced Board Cosmetics
                 Satin Finish Joints
                 Reduced Defects and High Reliability Assy's
                 No Clean Flux Carrier (Flux Designator REL0)
                 Low Residue
                 Extra Low Beading
                 6 Month Shelf Life (Stored Under 22°C / 72°F)

Other:  12 Generous Grams in Convenient 10cc Syringe
            Ships With MSDS




©1996 - 2011, 2012, 2013, 2014-2017, 2018-2019, 2020, 2021 Zephyrtronics®. All rights reserved. The information you receive online from Zephyrtronics® is protected by the copyright laws of the United States. The copyright laws prohibit any copying, redistributing, retransmitting, or repurposing of any copyright-protected material. Zephyrtronics is the registered trademark property of JTI, Inc. "The Science of Zephyrtronics" and "Simplicity Through Innovation" and "Zephlux" and "ZeroLead" and "Zero Balling" and "Zero Residue" and "Post Cooling" and "Post Cooler" and "AirBath" and "SolderGlide" and "SolderMill"  and  "Just So Superior" are the protected trademark property of JTI, Inc. "Zephyrtronics" and "Low Melt" and "Air Fountain" and "Fountainhead" are the registered trademark properties of JTI Inc. *The above names are the registered property of their respective owners.


Click link below to return to the top of the page



SMD Rework, SMT Rework
AirBath Air Bath, SMD Rework Stations, Hot Air Pencil Soldering, BGA Rework Stations, CSP Rework Stations, Preheating Systems, PCB Preheaters, Pre-Heat SMT/ SMD, Low Temp Rework, SMT DeSoldering Tools, Vacuum Pickup Tools, Circuit Board Holders, PCB Fixture & PCB Holders &, Board Cradles, Rework Solder Paste, No-Clean Solder Paste, Low Melt
® De-Solder Wire, DeSolder Wire, Hot Air Rework Stations, Fume Extractors, SMT Dental Probes, SMT, SMD Rework Kit, BGA Rework Kit, LMK Kit, BGA Re-Balling Kit, SMD Tweezers, Power Palm Plunger, QFP Lead Straightener

How To - SMT, CSP, BGA Rework
How To - BGA Alignment; How To - SMT Rework; How To - PCB Preheating, How To - BGA & CSP Rework; How To - Quickly Solder SMD Packages Effectively; How To - CSP Alignment; How To - Lead-Free Rework; How To - SMD Removal Economical; How To - SMD Removal Professional; How To - Hot Air Pencil / AirPencil Soldering; How To - SMD Quick Chip Removal; How To - BGA Re-Balling; How To - Rework PLCC, QFP, QFN, LCC, SOIC, SOL, Shielded SMD, TSOP; How To - Solder & Rework Ceramic Capacitors; How To - Solder & Rework Glass Diodes; How to Repair Smartphones, Tablets and Laptops

Soldering, De-Soldering
Soldering Accessories, Solder Wire, No-Clean Solder Wire, Eutectic Solder Wire, Solder Wire Dispenser, Solder Paste, Lead-Free Solder Paste, Flux, Solder Paste Dispensers, Low Melt
® DeSolder Wire, De-Solder Wire, Soldering Tips, Thru-Hole DeSoldering Tools, DeSoldering Tips, Tips for DeSoldering, De-Solder Wick & DeSoldering Braid, Smoke Extractors, Fume Extractor Filters, Carbon Activated Filters, SolderMill™, Solder Sucker / DeSolder Pump, Pre-heating Systems, Preheat Thru-Hole, PCB Pre-heaters, Flux Solvent, How To - Connector Rework; How To - PC/104 Soldering and Rework; How To - Thru-Hole / Through Hole Desolder / De-Solder; How To - Low Melt® Desolder Wire; How To- Stop Lifting Pads; How To- Desolder / De-Solder Heavy Ground Planes; How To - Lead-Free Soldering and De-Soldering; Pre-Heaters for Lead-Free Rework and Soldering

Dispensing Equipment, Gear, Supplies, Dispensing Bottles & Dispensing Accessories
Dispensing Systems, Dispensing Syringes, Dispensing Barrels, Tapered Dispensing Tips, Blunt Needles,
Dispensing Bottles, Stainless Steel Needles, Dispensing Needles, Industrial Needles, Dispensing Tips, Industrial Dispensing Tapered Tips and Needles, Dispensing Accessories, Flux Bottles, Solder Paste in Syringe, Paste Rack Solder Paste Holder, Dispensing Supplies, Power Palm Plunger, Manual Dispensing, Alcohol Pump Bottles, Automatic Dispensing, Squeeze Bottles, Wash Bottles, Brush Bottles, Spout Bottles, Pump Bottles

Benchtop Accessories, Bench Supplies, Benchtop Tools
SMD Solder Paste, Solder Wire, LowMelt®, No-Clean Flux, BGA Flux, Rework Tack Flux, Non-Flammable Flux Remover, Pen Vac, SMT Tweezers, Fume Extraction, SMD Tweezers, PC Board Fixtures, Hot Air Tips, AirTips, Replacement Soldering Sponges, Iron Plated Soldering Tips, Foam Swabs, Anti-Static Foam Swabs, Thru-Hole & Solvent Brushes, Helping Hands, LMK Rework Kits,
X-BOX 360 Repair, Wire Strippers & Wire Cutters, Flush Cutters, Micro Shears & Needle Nose Piers, Straightening Tool for QFP Leads, ESD Wrist Straps, ESD Wrist Strap Tester   

Updated for February 17, 2021